On a high-rise pour, the pressure at the back of the pump is the highest in the entire system. The swing elbow, the reducer, the couplings closest to the pump – that’s where the spikes happen at every cylinder switchover, and that’s exactly where your operator stands. It’s also where the ready-mix driver stands, backing into the hopper. As the job gets bigger, the truck count multiplies, and so does the number of people standing in that zone for hours at a time.
Most of those people are there all day without a second thought. That’s the part worth thinking about.
A backend component doesn’t have to fail catastrophically to hurt someone. A leaking seal, a worn coupling end, a pinhole in a wear crater – under high-rise pressure, any of those can put caustic material and debris where a person is standing. Inspection catches most of it. Nothing catches all of it.
That’s what the Con Forms Backend Cover is for. It’s an engineered product, not a tarp. Ballistic-grade material and reinforced sewing, built with Burst Technology that lets the cover expand to absorb a high-pressure blow-out and contain debris instead of letting it travel. Covers are available for both boom and line pumps and are designed for quick installation and removal, so cleanout and daily inspection don’t get harder. There’s a second benefit operators notice fast: the cover shows you your leaks. A wet spot on the fabric is early warning that something behind it needs a closer look, often before it shows up any other way.
We see a lot of pumps running without one. Not because owners don’t care about their crews – because the cover is easy to defer. It shouldn’t be. Measured against one injury, one shutdown, one back charge from a contractor watching your crew clean up a mess, a backend cover is one of the least expensive risk-reduction decisions in the fleet.
Your equipment is replaceable. Your people are not. Engineered to Pour – starting with the people who make the pour happen.
